> Products >

K1D OWB Single Mag Pouch (Double Stack)
K1D OWB Single Mag Pouch (Double Stack)

Our Price: $38.00

Availability:: Usually Ships in 3 to 5 Business Days
Product Code: K1D00

Firearm Make/Model*:

K1 Color*:

Carry Side (this item)*:


Belt Size*:
1 1/2"
1 3/4"

Thick Belt*:
Yes (Greater than 1/4" thick)

Mount Color*:
Coyote Brown
Olive Drab

Mounting Options*:

The K1DSingle Mag Pouch is for double stack magazines. This durable carrier can be clipped onto the belt or worn with a belt slide. The clip has 30 degrees of available cant (backward and forward) and the Belt Slide can be worn vertical or horizontal. Adjustable retention allows the operator to tighten or loosen the tension to their preference. For the fastest removal and insertion of a new magazine, our pouches carry the magazine with bullets forward.

Additional clips and mounts are available.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 7 Write a review »

  0 of 0 people found the following review helpful:
5 of 5 BEST IN CLASS PRODUCT May 17, 2016
Reviewer: Daniel  
Over the years I have owned and used all kinds of mag pouches. This is the highest quality kydex mag pouch on the market.


Was this review helpful to you?

  1 of 1 people found the following review helpful:
5 of 5 Stop waiting and just buy it May 11, 2016
Reviewer: Rob  
I'll be honest and start by saying that although I own and use various holsters from Ron, I've been very reluctant to get one of his mag carriers. I can’t really put my finger on why. Like most things bought over the internet, I went off the pics, and I just never pulled the trigger. There also weren’t a whole lot of reviews of his mag pouches…actually I couldn’t find any. I’ve carried Comptacs double mag pouch for years (but never one of their holsters…go figure)

But just the other week shopping for yet another holster from GI, I finally decided to try one of their mag pouches. I always carry both spares so I got the double.

I received it today and immediately started doing mag reloads and going through the adjustment process since each mag can be adjusted/angled independently. Each carrier is made from one piece of kydex (including the bottom) and folded over to the two silver screws you see in the pics.

Being 100% honest, although the workmanship is excellent as usual, they aren’t much to look at. In simplest terms it was two square boxes attached to a back plate. I was also concerned that maybe the height of the pouches would be too high compared to what I had been using and used to.

But after just a few hours on the range, I realized that aside from looks this pouch just works. It's simplicity in design. It fits tight to the body and the ability to angle the front mag forward (I keep the rear mag vertical) allows for some flexibility in where you put the carrier on your belt. We’ve all run into the situation where belt loops get in the way of our ideal mag placement on some pants…being able to cant a mag allows for a familiar grip while compensating for belt loop issues.

I also never once ran into any issues with, what I mistakenly thought would be, too high a cut of the pouch for magazine indexing. It’s higher than what I’m used to, but I also didn’t fumble any reloads because of any lack of grip. The higher cut also allows for higher security of your mags. You can adjust those screws so you’ll be pulling all day before they come out (post a YouTube vid if you try)

The entire carrier also rides perfect (kinda hard to tell from the website pics)but it only falls about 1/2-2/3” below the bottom edge of my 1.5” gun belt. For duty or concealed carry it's ride height is perfect.

The bottom line is this design just works. I’ll also say that whatever misconceptions I had about looks, frankly function is the most important regardless. Functionally this mag pouch is perfect. I’ve gone through many in my 20+ yrs as a LEO and it just has the right feel. I'm guessing that to reach the level of design simplicity and function this pouch has had to take lots of trial and error.

There’s also very little to break or fail. If something did happen it is modular enough to only replace the specific part vs. having to get a completely new carrier.

I hope this review helps if you’re on the fence about one of Ron and Sheryl’s products like I was. I can’t imagine you’ll be disappointed. And IMO the most important thing is that you’ll be doing business with two of the most helpful and customer oriented folks in the business. I’ve never met them, probably never will, but having talked to them on the phone about orders and trading emails over the years, they are great people.

My Comptac is going in a box.

Be safe, Rob


Was this review helpful to you?

  0 of 0 people found the following review helpful:
4 of 5 Magazine belt carrier modification May 7, 2016
Reviewer: Tracy Marie Kau  
I normally don't write reviews on things I buy. To be honest originally I was disappointed with the sport mag carrier with the belt slide. I bought this to be used with a CR speed belt for a shooting class. The belt slide loops stuck out to far. When looping the mag carriers through the belt, I could only use 2 carriers on the belt within my reach. But I wanted the option to possibly use 4 mag carriers at one time. My first instinct was to straight up return it and buy the CR speed mags. But I had bought these to match my awesome silent thunder champion holster.

When I contacted Ron for an RMA number, he was very courteous and willing to modify the belt slide to fit the thick two belt system. He quickly sent photos of the prototype slide. Sheryl and Ron have the best customer service. They modified the dropped offset mount I purchased as well to make it easier to put on the thick belt. I just received the revised belt slides yesterday and installed them. They are much more functional now. I'm satisfied. I'm sure with a little bit of tweaking it will be a great addition to your product lineup. Thank you for your great service.


Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Supremely flexible mag carrier April 15, 2016
Reviewer: R.C. Babcock  
I couldn't be more pleased with the K1 Mag carrier. It's rock solid on the belt and very flexible; it's simple to orient the cant at any angle and the carrier can be configured to work vertically or horizontally. Pretty impressive!

The only [very minor] issue is that the slide mounts so tightly to the belt that's a bit of work to get it onto my belt (a very thick & heavy BullhideBelts belt). Also, the mag fits very very tightly, even with the screws removed. However, it seems to loosen up/break in a little with use. And it's not hard to get the mag out when the K1 is actually on the belt.

Again, a very good carrier! I'm thinking of picking up a second one for another gun and maybe one of the larger double mag mounts.


Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Very flexible carrier! April 15, 2016
Reviewer: Rob  
Overall I really like the K1 a lot. It's very flexible. It ships configured for vertical carry but it's easy to remove the mount and set it up to carry horizontally.

There are two attributes that one should be aware of. First, the mag fits very tightly. With the tension screws removed it still takes quite a tug to get the mag out. Tighten the screws much and it ain't coming out! This is probably good but be advised that it's tight. Also, the mount fits the belt so tightly that it's difficult to slide all the way on (my belt is a 1/4" thick x 1.5" gun belt from Bullhidebelts.com). This does help it stay put but it's a lot of work to get it on.

Overall I'm really happy with this rig.


Was this review helpful to you?

View All Customer Reviews